101A01017

脈衝產生器 Pulse Generator

型號：81101A

• 1.單通道脈衝發生器 Single-channel pulse generator

• 2.50 MHz，10 V，50 Ohm 至 50 Ohm 0 MHz, 10 V from 50 Ohm into 50 Ohm

• 3.可選擇觸發/PLL 操作 Triggerable / PLL operation selectable

• 4.可調的轉換時間 Variable transition times

• 5.BNC 輸出，單端 BNC outputs, single-ended

• 6.下單前，請於「聯絡我們」與客服確認產品價格及庫存。

81101A 50 MHz單一頻道脈衝產生器是81100系列中的一款經濟、入門型儀器。 所有的時序參數（重複速率、延遲、寬度和轉換）都是可變的。 儀器中包含的PLL振盪器，可使重複速率維持在0.01%的準確度。 您可以使用雙重脈衝和脈衝叢發。當PLL關閉時，所有的脈衝都可以從外部來觸發。 如果內部PLL未被當作重複速率產生器，則也可以用它來觸發叢發。另外，還可以使用外部寬度（脈衝復原）模式。 可選擇的50/1000歐姆信號源電阻，可使輸出振幅在50歐姆負載下分別達到10或20 Vpp。 81101A 50 MHz single-channel Pulse Generator is the economy, entry-level instrument of the 81100 family. All timing parameters (repetition rate, delay, width and transitions) are variable. The instrument comprises a PLL oscillator that enables the repetition rate to be kept within 0.01% accuracy. Double-pulses and pulse bursts are available. All pulses can be triggered externally when the PLL is turned off. Bursts can also be triggered by the internal PLL if it is not in use as the repetition-rate generator. An external width (pulse recovery) mode is available, too. The selectable 50/1000 Ohm source resistance allows output amplitudes up to 10 or 20 Vpp respectively into a 50 Ohm load.